90 honda crx si total part out....lots of after market parts - Honda-Tech

yz125rider21 · 10-20-2009, 06:35 PM

here is a small list that will be building everyday the further i tear down my car. will be all crx parts for a 88-91.....mainly want all local pick up but could arrange shipping...

Honda Forks(forgot what they came off but they make are EF'S able to swap out axels without having to remove the fork because they are wider than our stock ones) $25

B series half shaft out of my b20 that was in my crx. this is what you need for a b-swap in our ef's $40

Clutch Masters B-series Hydro clutch and heavy duty pressure plate(I forgot the stage think its a 2 or 3 cant member so look at the pics) but its in good shape. $150 or best offer.

b20b has roughly around 60,000 miles on it and timing belt and waterpump is a gsr if i remember correctly. runs perfect and there is nothing wrong with it. $500 takes it minus dizzy.

b series cable VSS already modded the holes for our EF's $50 or best offer

Hasport hydro mount kit for a 88-91 honda crx with left side engine bracket and rear engine bracket with bolts for a easy swap. gone on ebay---- http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT

Honda OEM rear speaker brackets $25

Honda crx si 89-91 ss goodridge steel braided brake lines all around $60

90 honda crx si rear brake lights OEM...left side has a real tiny crack in it and the right side has a long hairline one pictured but is super hard to tell when on car. $80 or best offer

Pro stop rotors by Power Slot with hawk hps pads. have only 1,000 miles on them. rotors costed me $300 and the pads ran around $120. I will take $200 picked up.
link to rotors http://www.brakewarehouse.com/pro_stop_rotors.asp

front and rear lower control arms with polyurethane kit on them. Makes a huge difference in cornering

. so no sweating trying to get old woring out oem bushings out. on ebay----- http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT

90-91 honda crx si rear disc brake setup with upper camber kit and polyurethane bushings installed on the trailing arms already. $200 or best offer

red corbeau cr1 seat with honda crx brackets for 89-91. one seat is not faded but has some dark stains on where you sit. other seat is sun faded from when i left my car partly in the sun when i was on vacation for a month

and has a some stains on it with a small cut on the back of it. took a lot of pictures but some dont show the stains enough. but you can recloth these seat if you want or dye them. dont matter... will come with sliders....askin $400 for seats with sliders or $325 for just the seats. costed me $1200.00 new with brackets

Honda crx si knuckes/spindles. they both have 2 sets of camber kits on them already for those who are slammed low camber wont be a issue

. also the calipers have speed bleeder screws so you dont need two people to do the brakes. www.speedbleeder.com $125 or best offer

Honda crx exhaust 2 1/4 with high flow cat, resinator, and dynomax turbo muffler ready to bolt on and done with mandrel bent tubing so its all equal through the bends(just need to be weld or flange by the header. $100

Honda dc sports rear lower strut bar. Eye hook broke on one side when I tried to straighten it out but they are cheap to get. $40 or best offer

full-race radiator half size with full-race fan. on ebay----- http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT

Momo steering wheel with hub for crx(one wire is not there on back being i had the nitrous hooked up there when i use to use it but easy to redo it. gone on ebay (http://cgi.ebay.com/ebaymotors/ws/eB...m=120492623746)

This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!

hitman123 · 10-20-2009, 07:08 PM

do you have the center console i need all the parts

yz125rider21 · 10-20-2009, 07:25 PM

Quote:

Originally Posted by hitman123

do you have the center console i need all the parts

yes make a good offer and its yours if local!!

JRZ88DX · 10-20-2009, 08:12 PM

do you have
rear speaker covers
two front pieces of the side protectors
two plastic pieces that cover backup lights
two plastic clips that hold on speedo cluster cover
the brackets the hold the rear speakers in place

doesn't matter color

ghg78 · 10-21-2009, 06:40 AM

bump for pm about the harness.

hitman123 · 10-21-2009, 07:36 AM

Pm me a price for the complete center console and the intake. I'm in LA so if your near I can pick it up Saturday.

yz125rider21 · 10-21-2009, 03:41 PM

Quote:

Originally Posted by hitman123

Pm me a price for the complete center console and the intake. I'm in LA so if your near I can pick it up Saturday.

I live 5 hours away in modesto, ca...readlly dont want to ship out that being it will cost some money. but aem intake is price on here and center console shoot me an offer on it and all that you want included with it

JRZ88DX · 10-23-2009, 09:59 PM

still have the obd0 - obd1 harness???

crazyboy · 10-24-2009, 12:59 PM

ur in modesto? i need the bumpers and sideskirts, do you got em? my rex came with the "mugen" body kit and i dont like it lol. let me know a price if u still got them, im in modesto