For sale is my spare 95 b18b built bottom end with 9.0:1 comp JE pistons and Eagle H Beam rods bored out to 81.5 mm. I have had the block for bout a year and has NO miles on it. All the bearings are ACL. I have the same bottom end in my Type R and made over 400 whp on stock sleeves. Anything over that I would get them sleeved. If your goals are less than 400 whp than it should be fine. The machine work was done at Don's in Kenosha, They milled the block clean it up and matched the bore to the pistons that I gave them. Looking to get 800 obo.. I have over 1000 in the bottomend alone. Pm me ?s
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!
__________________
1997 Integra Type R
365 whp/ 262 trq @ 14 psi
Best 1/4 12.5@119 at 11 psi
Best Trap 123mph at 11 psi
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for HondaMarketPlace.com content, comments, or advertising. HondaMarketPlace.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse HondaMarketPlace.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.