JDM K20R JRSC Integra Type R *FLAWLESS* BUILD IT HOW YOU WANT IT!

[Preludeking]

FYI Facts: - Car has only ever had 4 tanks of gas into it since its been built (in 3 years). - This car has done more KM on a trailer then under its own power. - The Engine has less than 30km (yes thirty) with the SC on it. - This car is fully licensed and legit with valid Ontario ownership (the only known LEGIT licensed RHD Authentic ITR that’s not a conversion in Canada). I’ll be happy to take serious buyer to MOT, RIV, Police, Customs Canada with car and ownership for inspection. - This paint job (done by MS Auto Collision) is very very detailed. This is not an average paint job. Every piece of glass and trim was removed from the chassis before the car was painted. Doors, trunk…..everything removed. I spent more in trim and glass alone than most people spend on their whole paint job. Detailed pics can be provided of full chassis stripping and restoration. - Looking for a serious buyer, not a tire kicker. Willing to make package deal and negotiate on price with whatever parts the buyer wants included. - “Mint” does not even begin to describe the condition of this car. - Car has only seen rain twice since paint. - Car is located in Toronto Canada. Shipping/Delivery can be arranged. - Everything on the car is A++++ condition. Anything with any flaw was replaced with new. ex. Car always had spoon calipers, slight oxidation on lines...replaced with brand new spoon calipers! Car: 1996 Honda Integra Integra Type R (Imported from Japan). Km: 74,XXX on chassis 4X,XXX on K20A-R engine Asking Price: From (<- PLEASE READ) 15,500$ CDN. Serious Buyers please contact me directly to discuss package. Looking for a series buyer who wants the car (with stock exterior and interior) with the K20 Type R engine, and we can discuss details and package deal from there. Here is how the car currently sits: Engine: JDM DC5 K20A Type R Hybrid Racing Motor Mounts Drive Shaft Shop Axels K-Tuned Fuel Rail K-Tuned Custom Fuel Line Kit Aeromotive Fuel Pressure Regulator Ultimate Racing Fuel Pressure Gauge Walbro 255 Fuel Pump Hybrid Racing Clutch Line Karcepts Shifter Relocation Box Hybrid Racing Swap Harness Jackson Racing EP3 Race Gen IV JR62 Supercharger K24 Crank Pully Mishimoto 12inch Slim Electric Fan Mishimoto Silicone Hose Kit Mishimoto RSX Aluminum Radiator Mishimoto Radiator Brackets Mishimoto Fan Switch R-Crew Header Hondata K-Pro Honda RDX Injectors Password:JDM Kevlar Power Chamber Password:JDM Intake Manifold Gasket Bully Performance Stage 3 Clutch Password:JDM Kevlar Plug Cover 3 Inch V Band Tig welded Stainless Custom Catback with Vibrant Ultraquiet Resonator (as muffler) with turndown Magnaflow Highflow Cat Odyssey PC 680 Battery Pasword:JDM Battery Relocation Box Pasword:JDM Blue Fender Washers Shaved Engine Bay Wire Harness Tuck Engine Harness Tuck Tuned by Nick @ Teknotik.com Suspension/brakes: PIC Select 12k/10k Coilovers Spoon Twinblock Calipers Brembo Front and Rear Rotors Hawk HP+ Pads Earls Stainless Steel Braided Brake Lines T1R Front Upper Control Arms Mugen G2 Front Upper Strut Bar Mugen G2 Rear Upper Strut Bar JDM 98 Spec 5 Bolt Conversion Cusco DC2 6 Point Cage Exterior: Sprint Hart 15 inch CP-R 5x114 32 Offset T1R Open Ended Lug Nuts OEM Optional Sides OEM Optional Rear Caps Back Yard Special Front Bumper C West Carbon Fiber Hood JDM 98 Spec DC2 Power Folding Mirrors 98+ JDM HID Headlights Ignited HID Bulbs JDM Access Honda Door Visors PPG Championship White Paint JDM DC5 i-vtec rear badge DC4 Modified Fender liners Interior: Bride Low Max Carbon Kevlar Buckets Vision DC2 Seat Rails Defi Water Temp, Oil Temp, and EGT Guage AEM UGO Wideband AEM Oil Pressure Guage Takata 4pt Harnesses Apex-I Rev Speed Meter DC5 Type R JDM Mats Mugen Pedals JVC Deck Alpine Speakers Mugen Cluster and Bezel JDM 98 Spec DC2 SRS Steering wheel Hybrid Racing Weighted Shift Knob JDM 98 Spec DC2 Center Console Optional: The car can be set up with any of the following to fit the buyers wants/needs/budget: Engine: K20A2 K24 RBC Intake manifold RDX injectors Password:JDM Carbon Fiber Power Chamber Password:JDM Carbon Fiber Plug Cover Hybrid Racing Standard (Untucked) Fuel Lines with Golden Eagle Black Fuel Rail Stock PRC ecu with Jackson Racing Powercard Wheels: Sprint Hart 15 inch CP-R 5x114 (32 Offset) Volk 16x8 TE37 White 16inch ATS Complites 15" (35 offset) Black Racing Hart Forged CP0-35 15" Silver Mugen MF10 – NOT FOR SALE Exterior: OEM Bumper with OEM lip OEM Bumper with Spoon Lip OEM Bumper with Spoon Lip and J’s Racing Air Duct Mugen Style VIS Bumper with Mugen Style Sides (Wings West) BYS DC2 Bumper (yes I have 5 separate bumpers) Mugen Style Gen2 Spoiler OEM Type R spoiler CF Spoon Hood C West CF hood (painted) OEM Hood OEM side skirts Interior: Gutted or Full interior Bride Low Max Carbon Kevlar Buckets Bride Low Max Adjustable Seats (Gradation) Black DC2 Recaros Stock DC2 Cluster Exhaust: 2.5 inch V Band tig welded Stainless Midpipe with Mugen Gen2 DC2 Muffler 3 Inch V Band tig welded Stainless Catback with Stainless Vibrant resonator and turndown tip ALL PARTS ARE AUTHENTIC UNLESS LISTED OTHERWISE – “Spoon” means Spoon not “Spoon stye” - If you don't know what the word "Mugen" or "BYS" means, please don't email. This car is not for you. - If you want the car stock with engine swap; I can do that. If you want the car stock with engine swap and supercharger; I can do that. If you want the car stock with engine swap and spoon lip; I can do that......If you want just the car with no engine; I can do that. Let me know what you want! If you have any questions feel free to contact me via email or directly at either of the number listed below. Eric Daoust eric@teknotik.com office: (416) 907-3851 direct: (416) 602-4677 http://www.teknotik.com 220 Midwest Rd, Scarborough ON, M1P3A9 CHECK OUT CANADAS LARGEST JDM ONLINE COMMUNITY!!! ----> http://www.jdmrides.ca Some of the mod list and changes not reflected in pics: Here are some more recent updated pics (from the weekend) showing the new fuel line setup and FPR change, kevlar power chamber and plug cover to match the BYS bumper.

This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Honda-Tech!

[gsrswapdcivic]

thinking about this....

first whats the price as is with everything?

would you be willing to meet in person in Detroit mich?

any trades?

again just thinking about the purchase and had these questions

[Preludeking]

Originally Posted by gsrswapdcivic

thinking about this....

first whats the price as is with everything?

would you be willing to meet in person in Detroit mich?

any trades?

again just thinking about the purchase and had these questions

Realistically, the price with everything just would be out of market. With so many parts it would just be a stupid price.

If you would honestly be interested in the complete car as it sits give me a call to discuss. I'm willing to work out a package deal and discount all the parts accordingly.

Just for example sake here is current used value for a couple of the parts....

Sprint Hart 15 inch CP-R 5x114 32 Offset - 2000$
OEM Optional skirt kit - 1000$
Cusco 6pt cage - 1000$
Takata belts - 600$
Spoon calipers - 1200$
BYS Front Bumper - 1000$
Bride Low Max Carbon Kevlar Buckets - 3000$
__________
Aprox 10,000$

That's only a few parts and 10,000$ already.....

As was posted, I'm basically looking to sell the car without the supercharger, with stock interior and exterior for 15,500$. This is basically the price you would pay to buy a stockish USDM Type R for currently. In this case, you get a full authentic JDM Integra, a Kswap (which would cost you over 10,000$ to replicate) and a paint job worth half of the selling price of the car itself.

I could deliver the car to Michigan.

Possible trades.

[gsrswapdcivic]

how would you fill about a usdm EVO 8 with a spun #1 rod bearing (easy fix)
fair market value with spun bearing (i have it listed on an evo site right now) is about 17,000 puts down over 400 WHP upgraded turbo

so your car stock ext. stock int. and supercharger for 16,500? is cage a weld in or bolt in?

[98Luder]

wow nice car
bump it for a fellow Canadian!!

[Preludeking]

[www.megameet.org]

very nice! Bj is a great guy, and just as maticulous as you are with his vehicles. I couldnt think of a better person to own such a perfect vehicle. It will have a well kept home! You dont have to worry about that.

What were some of the numbers and any specs you may have on the tune?

[marshallbj]

Eric,

Do I stil have dibs on the car or are you still looking for other offers?

[Preludeking]

bump

[MugenTeggyR]

How much would cost to have it shipped to 33141 - Miami, FL. I might be looking forward in getting this car. Already have saved up 9k, i would get a loan to met up your price.

[sitinthehall]

Originally Posted by gsrswapdcivic

how would you fill about a usdm EVO 8 with a spun #1 rod bearing (easy fix)
fair market value with spun bearing (i have it listed on an evo site right now) is about 17,000 puts down over 400 WHP upgraded turbo

so your car stock ext. stock int. and supercharger for 16,500? is cage a weld in or bolt in?

I don't know why you would even offer that...

Beautiful car by the way. Good Luck with the sale.

[EGR95]

bump

[Preludeking]

Thanks for the comments! This sale kills me.....