Honda-Tech

looking for wheel repair shop in nw

turbob18si — Fri, 20 Nov 2009 21:01:40 GMT

I have some wheels with a light rash n slight bend that I would like straightened and repolished. they are 2 piece so its just the barrels. anyone know any quality shops with resonable pricing.
TIA

H22 Head, Built or stock. Your choice.

97_Built — Fri, 20 Nov 2009 20:59:00 GMT

I've got two options for ya. This is a clean H22 VTEC head fully stock with cams. 113k gentle miles, never seen forced induction, nitrous or high compression. Passed the alcohol leak-down test. I can sell it just as it is, ready to bolt onto a block,

or

I can have it built and ready for high compression. This includes a full race port and polish, 3 angle valve job, new flat faced or disc stock size valves, Skunk2 and Supertech valvetrain, and my barely used Skunk2 Stage 2 Tuner cams.

Both come with a clean black valve cover, valve adjustment made, cams installed, ready to bolt on and run.

Shoot me an offer for either. This head needs to go soon because my family is in need of cash immediately, babies can get expensive :o. I live in central Kentucky. If you are within reasonable driving distance, I can deliver it free of charge. If you can't reach me on here, my number is 270-473-0226. Call or text me anytime.

Thanks for your time
Mike

Attached Images

WTT - functionFORM type1 coilovers accord 90-97

sinfulDB1 — Fri, 20 Nov 2009 20:51:22 GMT

WTT - function form type 1 full coilovers

hey guys.. just lookin to trade my function form type 1's for some other full coilovers. They are almost brand new they've only been on the car for a couple months. The functionforms ride awesome and are great coilovers.. but you cant adjust the height to moderately lowered. These coilovers lower the car 2"+. I kind of want something that i can raise it up to maybe 1.5" lowered. Im looking for something that has nice height adjustability. The functionforms are either dumped.. or SUPER dumped..
pm me or email me with what ya got...
iankraft@gmail.com

wtb jdm carbon fiber hood for ef

EF9SIRBOY — Fri, 20 Nov 2009 20:49:49 GMT

im just putting out there if anybody has one in mint condition i will buy it. i have cash in hand and its burning in my pocket. let me no thanks

WTB: 15" Rotas/Drag/Spun I got $300

ej2man — Fri, 20 Nov 2009 20:48:49 GMT

NO OEM PLEASE
Im lookin for 15" Only 4 X 100
Minimal curb rash is fine
Must come with tires 195/50/15 or 205/50/15 and GOOD TREAD
SHOW ME WHAT YOU GOT MY LIMITS $300!

GSR n LS tranny's for CHEAP!!

jdmkid626 — Fri, 20 Nov 2009 20:46:09 GMT

i got an ls tranny with 3rd gear grinding at high rpms- 150
gsr tranny with no grinds- 350
both these tranny's r HYDRO!!
if u want a pik of these text me
n I'll send u a flik
626 217 3380 Gabriel

Del sol headlights, rear carbon fiber garnish

xSteve_Ox — Fri, 20 Nov 2009 20:38:39 GMT

Going for more of a oem look, no use so must sell..

-eBay headlights for del sol. no cracks, scratches. -$70 shipped.

-was told is was Vis carbon fiber rear tag garnish piece, passenger lower corner has clear chipped off but not really bad. Not scratched up either. Has I <3 del sol sticker on it. -$130 shipped firm.

<>

FS: GSR HEAD COMPLETE

mike1114 — Fri, 20 Nov 2009 20:35:40 GMT

--------------------------------------------------------------------------------

GSR Head complete, including intake manifold.

Im not on HT much anymore call me at 407-810-8965 if interested.

I can provide picture if U want.

I just want to get rid of this. I was working on a project and abandoned it, I sold most of the stuff off here on Hondatech (search my name for posts) but the head is one thing I still have sitting around.

$300 + shipping. I prefer local pickup but I will ship if you want.

One thing to note, there are two header studs that are bent. (when shipped to me) they will just need to be replaced, no big deal.

I want this gone soon. I'm moving and would prefer NOT to have to move it.

WTT:JDM ITR CLuster for Integra OEM WIndow Visors with all clips

famousdc2 — Fri, 20 Nov 2009 20:25:25 GMT

like title say .. want to trade my ITR cluster with only 50,000 km's for a clean set of visors for the integra .. used but they need be clean .. interested? .. In located in El Centro, CA and calexico too.

FS:ingall torque damper for RSX

jentee — Fri, 20 Nov 2009 20:21:04 GMT

5105021172
pick up in alameda
since i bought it i never putted it on.... didnt have the tools to do it so it been sitting.
taking 80 for it. :thumbsup: firm my lost your gain!

come with instruction and all the stuff... except the tools of course
basically the previous owner had it on for a week.. and went full engine mount and i purchased it and end of the life story
it forsale now=]

Also Selling a Strup Shorty Header For 100 obo.

WTB: TWO 225/45/17 tires

omg_miiiike — Fri, 20 Nov 2009 20:20:18 GMT

Just seeing if anyone has anything laying around they'd like to part with. I NEED 225/45/17 and cannot settle for anything less so don't offer me your 215's.

Let me know VIA PM, I'm located in the Crofton Maryland area. :thumbup:

Fs: Hi beam/low beam slim ballast hid kit like new!!

MidoriEKing — Fri, 20 Nov 2009 20:13:33 GMT

im sellin my hid kit is hi beam low beam i got it, installed the lights and a month later back out again cause of the swap
they r like new 6000k
bulb is H4 came out of my ek hatch...
will sell for 150$
i paid 279$

located in utah
will ship! 48 states!!

this is not cheap ebay or at least i didnt get them there but w/e

Looking for DA corner Lights. Need asap!

thatDAkid — Fri, 20 Nov 2009 20:06:29 GMT

I need the corner head lights for usdm headlights. I have cash in hand and am rdy to pcik them up RIGHT NOW(Nov. 19th 2009). Please call asap. Im located in N. Hollywood(91602). Call Damian @ (818)441-9648

ITR wheels and lots of honda stuff

flyboiphuong — Fri, 20 Nov 2009 20:05:44 GMT

My dad is trying to sell his Honda EU3000iSA generator he only used it for a week for missiouri asking price $1,850 obo
Still looking spanking new and in good working condition he paid $2300
http://i4.photobucket.com/albums/y14...is_250x250.jpg

Got a full set of ITR polish 15 in wheels 5 lug. was champ white but sanded down. so now its polish needs minor sanding down tires are still great no camber wear
asking price $600 OBO considering steelies too
http://i4.photobucket.com/albums/y14...g/IMG_2681.jpg
http://i4.photobucket.com/albums/y14...g/IMG_2682.jpg
http://i4.photobucket.com/albums/y14...g/IMG_2683.jpg
http://i4.photobucket.com/albums/y14...g/IMG_2684.jpg

Also got a full set of Rota Circut 10's 16inch wheels bronze some straches minor rash nothing major tires are still drivable but needs replacing has camber wear $450 OBO considering steelies too on btw these are 4 lug universal
http://i4.photobucket.com/albums/y14...g/IMG00343.jpg
http://i4.photobucket.com/albums/y14...g/IMG00338.jpg

Got 2 rims for Honda Prelude Si 95 for $100 obo bucks with great tires on them and H center caps
http://i4.photobucket.com/albums/y14...g/IMG00446.jpg
http://i4.photobucket.com/albums/y14...g/IMG00447.jpg

also got an ep3 attena $30 bucks obo
http://i4.photobucket.com/albums/y14...g/IMG_2257.jpg

got an 1996-2000 honda civic hatchback spoiler primer everything still working $30 bucks
http://i4.photobucket.com/albums/y14...g/IMG_2678.jpg
http://i4.photobucket.com/albums/y14...g/IMG_2680.jpg

Also have 2 front seats for 96-2000 civic $40 bucks OBO
http://i4.photobucket.com/albums/y14...g/IMG_1922.jpg

Honda civic hatchback 96-2000 back bumper $25
http://i4.photobucket.com/albums/y14...g/IMG_1896.jpg

text me 682-551-8991

WTB: complete B16 head

visionw8 — Fri, 20 Nov 2009 19:49:27 GMT

I have 200 dollars to spend, and i am willing to throw 92-95 civic hatchback oem mud guard (good condition $80 value) over it depending on the deal.